Skip to content
Appliance technician kneeling beside a stainless refrigerator in a 1960s oak-cabinet kitchen, tool bag and multimeter on a drop cloth

Appliance repair in Rockford, IllinoisYour Appliances, Back in Service

Refrigerators, washers, dryers, dishwashers, ranges and more, repaired in your home across Rockford, Belvidere and every town in Winnebago and Boone counties. Prices from national 2026 cost guides, quoted before any work starts.

Get a repair price

A local technician calls back with a time and a price before any work starts.

Rather talk? Call (815) 800-0677 or text us.

What we repair

Appliance repair, by appliance

All 18 appliances we repair

How it works

  1. Call, text or send the formGive the appliance, the brand, the model number if you have it, and what it is doing.
  2. Get a time and a priceA local technician calls back to set a time, and quotes the job before any work starts.
  3. Repaired in your homeThe technician diagnoses it in the home and does the repair on the spot or on a return visit.

Ready for a price?

Call, text, or send the form. A local technician gives you a price before any work starts.

Updated

Appliance repair in Rockford, in short

Most appliance repairs in Rockford cost $100 to $430: a refrigerator $150 to $400, a washer $180 to $250, a dryer $100 to $430, a dishwasher $175 to $325 (Angi, 2026), plus a $70 to $130 service call. Rockford's water is very hard, about 377 mg/L in Illinois EPA samples, which is why dishwasher film, ice makers and inlet valves come up so often here. Gas, refrigerant and dryer-vent work have their own safety rules, covered below.

Pricing

What appliance repair costs in Rockford in 2026

These are national ranges from Angi's 2026 cost guides and HomeGuide, each with its date on the cost page. They include parts and labor. The service call is separate: HomeGuide puts it at $70 to $130 for travel, diagnosis and the first hour, and some technicians credit a diagnostic fee toward the repair. Gas appliances run 10 to 20 percent more to repair than electric ones, HomeGuide says, because of part prices and the extra safety work.

No source publishes Rockford-only repair prices, so we do not invent one. Your technician quotes the job after diagnosis and before any work starts.

Full 2026 price tables by appliance and repair
Typical repair, parts and labor
ApplianceTypical rangeSource
Refrigerator$150 to $400Angi
Freezer$100 to $400HomeGuide
Ice maker$75 to $660Angi
Washing machine$180 to $250Angi
Dryer$100 to $430Angi
Dishwasher$175 to $325Angi
Oven$130 to $310Angi
Stove or range$108 to $251Angi
Microwave$100 to $200Angi
Range hood (vent hood)$100 to $300Angi
Garbage disposal$70 to $310Angi
Dryer vent cleaning$75 to $340Angi
Air conditioner$150 to $650HomeGuide

Appliances

Every major appliance, with its own price and what usually goes wrong

Each one below is a real page: the symptoms and causes from the manufacturers' own troubleshooting, the checks you can make before a visit, what the repair usually is and what it costs in 2026. Gas and propane appliances, sealed refrigeration systems and dryer vents have their own safety notes.

Most refrigerators stop cooling before anything is actually broken. Whirlpool's own checklist starts with blocked air vents, dusty condenser coils, wrong control settings or Demo mode. A second fridge in an unheated garage is a common Rockford call too: Whirlpool designs its refrigerators for a room between 55°F and 110°F, well above a Rockford garage in winter. When the problem is the sealed system, only a technician certified under EPA Section 608 can legally open it, and a compressor runs $300 to $800, InterNACHI gives a fridge 9 to 13 years before replacement looks better.

Price: $150 to $400, averaging $275; a compressor runs $300 to $800 (Angi, 2026)

Refrigerator Repair details
A chest or upright freezer in the basement or garage is easy to forget about until something in it thaws. HomeGuide puts freezer repairs at $100 to $400: an evaporator fan motor or start relay is the cheap fix, while new coils or a compressor can cost nearly as much as a new unit. The FDA's target is 0°F, and FoodSafety.gov says a full freezer holds that temperature for about 48 hours with the door closed. Anything that opens the sealed system needs an EPA Section 608 certified technician, and Illinois bans landfilling a freezer with its refrigerant still inside.

Price: $100 to $400; fan motor or start relay is the cheap fix, coils or a compressor is not (HomeGuide)

Freezer Repair details
Most ice maker calls here trace back to water pressure or Rockford's hard water. Whirlpool says the inlet valve needs at least 20 psi to fill the mold, and that a reverse osmosis system can drop pressure below what a freestanding ice maker needs. GE says its freestanding ice makers may need cleaning as often as every six months in hard water, since minerals build up on the freezing plate, and Angi notes inlet valves are prone to the same buildup. Rockford's water measured a median of about 377 mg/L of hardness in Illinois EPA samples, very hard on the USGS scale.

Price: $75 to $660 depending on the part; an inlet valve runs $90 to $225 (Angi, 2026)

Ice Maker Repair details
Modern washers tell you what's wrong before a technician arrives. A code for not draining, Whirlpool's F9 E1, Samsung's 5C or LG's OE, usually means a kinked drain hose or a clogged pump filter; a code for not filling points at the supply valves. Whirlpool recommends replacing washer inlet hoses every five years to cut the risk of a burst hose flooding the laundry room. Angi's 2026 guide averages $220, mostly $180 to $250, with a drain pump at $150 to $400 and a motor up to $700. InterNACHI gives a washer 5 to 15 years before replacement is the better math.

Price: $180 to $250, averaging $220; a motor can run $250 to $700 (Angi, 2026)

Washer Repair details
Before assuming the worst, run Whirlpool's own checklist: make sure it isn't set to an Air Only cycle, check the breaker on an electric dryer, and confirm the gas valve is open on a gas dryer. If a load still takes two cycles to dry, the U.S. Fire Administration says that pattern usually means a clogged vent, and failure to clean the vent is the leading cause of the roughly 2,900 residential dryer fires a year, peaking in January. Angi's 2026 average is $180, mostly $100 to $430, with a no-heat repair at $80 to $420.

Price: $100 to $430, averaging $180; no-heat repairs $80 to $420 (Angi, 2026)

Dryer Repair details
A gas dryer that tumbles but stays cold almost always starts with the shutoff valve: Whirlpool says the drum turns but won't heat if it's closed. Most gas dryers ship set up for natural gas; GE says converting to propane needs an LP conversion kit fitted by a qualified installer, which matters in the townships where most homes heat with tank gas. If you ever smell gas near one, Nicor Gas says to leave immediately, avoid anything that could spark, and call 888-642-6748 and 911 from outside. HomeGuide notes gas appliances typically cost 10 to 20 percent more to repair than electric ones.

Price: No-heat repairs $80 to $420 (Angi); gas appliances run 10 to 20 percent more than electric (HomeGuide)

Gas Dryer Repair details
Standing water in the bottom is the most common call: Whirlpool's checklist is the filter, the drain hose, and on a new install the knockout plug in the disposer that's sometimes left in place. White film and cloudy glasses are usually hard water, which is Rockford's water: GE says buildup can damage dishwasher components over time, and some Bosch models flag it outright as code E12. Bosch's E15 means its leak-protection switch found water in the base, a safety shutoff, not something to just reset. Angi's 2026 guide averages $225, mostly $175 to $325.

Price: $175 to $325, averaging $225 (Angi, 2026)

Dishwasher Repair details
An oven that won't heat usually comes down to one part. On electric ovens, Whirlpool says the bake element should glow red, and if it doesn't, it likely needs replacing; on gas ovens, a dirty or failed igniter is the usual suspect. An F code is the control reporting a fault rather than a guess: GE's F2 means the oven passed a preset temperature, and Frigidaire's F10 is a thermal-runaway safety alert. Angi's 2026 guide averages $200, mostly $130 to $310, with an igniter around $200 and a control board around $225.

Price: $130 to $310, averaging $200 (Angi, 2026)

Oven Repair details
A burner that clicks but won't light is almost always simple. GE says it's usually a wet or dirty burner, an electrode that isn't seated right, or a cap that doesn't match its head, and the clicking continues until the ports dry out. No clicking at all usually means the circuit breaker, since gas ranges still need electricity for the igniters. Gas ranges ship for natural gas; propane needs an LP conversion kit from a qualified installer. Angi's 2026 average is $179, mostly $108 to $251, and InterNACHI gives a gas range 15 to 17 years, the longest of any major appliance.

Price: $108 to $251, averaging $179; an igniter runs $150 to $300 (Angi, 2026)

Gas Range Repair details
GE's own test for a dead coil burner: unplug the range, then swap the burner into another same-size receptacle. Still cold, the element is bad; heats fine, the receptacle or switch is. If every surface burner is out but the oven still bakes, GE says that pattern needs a service call, not a DIY fix. Smooth glass and radiant tops cost more to fix: Angi's 2026 guide puts glass top replacement at the most expensive common stove repair, $250 to $600, with induction repairs at $200 to $500 or more. Overall electric stove repairs run $100 to $350.

Price: $100 to $350; glass top replacement $250 to $600 (Angi, 2026)

Electric Range Repair details
Cooktops hide their rating plate: Frigidaire says the model number is typically on the underside of the cooktop base, and Whirlpool lists it inside the burner box or underneath, so a photo before the visit saves a return trip. Built-in gas cooktops fail the same way gas ranges do, wet or dirty burners and misplaced caps first. A cracked glass top shouldn't keep being used: liquid can reach the elements and wiring underneath. Angi's 2026 figures: glass replacement $250 to $600, induction repairs $200 to $500 or more, a burner $120 to $250.

Price: Glass top replacement $250 to $600; induction $200 to $500+ (Angi, 2026)

Cooktop Repair details
A built-in wall oven fails the same way a range oven does, bake elements, sensors, igniters, control boards, door locks, but costs a little more to reach: HomeGuide lists built-in units and tight spaces as factors that raise labor. Whirlpool puts the model number on the lower left side of the frame with the door open; Frigidaire along the interior side trim. The same F codes apply: GE's F9 is the door lock circuit, Frigidaire's F10 a thermal-runaway alert. Angi's oven range is $130 to $310, averaging $200, and Bosch backs its built-in wall ovens with a one-year parts and labor warranty new.

Price: $130 to $310, averaging $200, like any oven; built-in access can add labor (Angi/HomeGuide)

Wall Oven Repair details
If it runs but doesn't heat, Whirlpool says to rule out Demo mode, Control Lock and a power level set too low before blaming the magnetron, a door switch or the high-voltage diode, which are not DIY parts. The FDA is direct on one point: don't operate a microwave whose door doesn't close firmly or is bent or damaged. An over-the-range unit is also the range hood below it, and GE says its metal grease filters need cleaning about every six months. Angi's 2026 guide averages $175, and an over-the-range repair runs $100 to $300.

Price: $100 to $200, averaging $175; over-the-range units $100 to $300 (Angi, 2026)

Over-the-Range Microwave Repair details
Before calling about a weak or silent fan, check the filters: GE says metal grease filters in range hoods and over-the-range microwaves should be soaked in hot water and detergent about every six months in normal use. If cleaning doesn't fix it, the usual order is the breaker, then whether the light still works, then the fan switch and blower motor. Angi lists vent hood repairs at $100 to $300 as an add-on in its stove repair guide, and InterNACHI expects a range hood to last about 14 years.

Price: $100 to $300, listed as a stove add-on (Angi, 2026)

Range Hood Repair details
Samsung says a wine cooler running too warm or too cold usually has a simple cause: the wrong temperature setting or the unit switched off by accident. After that, check the front grille isn't blocked, since under-counter units breathe through it, and that the room isn't too cold for the compressor. If the settings check out and it still won't hold temperature, it's a refrigeration repair, and anything that opens the sealed system needs an EPA Section 608 certified technician. No national cost guide prices wine cooler repair, so we won't invent one; the closest comparison is refrigerator repair at $150 to $400 (Angi).

Price: No national cost guide; closest comparison is refrigerator repair, $150 to $400 (Angi)

Wine and Beverage Cooler Repair details
Before calling, try the reset: InSinkErator puts a red square overload button on the bottom of most disposers, and if it's dropped about a quarter inch, a press, and a ten-minute wait if it won't stay up, often fixes it. A unit that hums but doesn't turn is usually jammed; never reach into the chamber. If a dishwasher stopped draining right after a new disposer went in, Whirlpool's first check is whether the knockout plug was removed from its dishwasher inlet. Angi's 2026 range is $70 to $310, averaging $230, and Angi says a disposal eight years old or younger is usually worth repairing.

Price: $70 to $310, averaging $230; batch-feed and continuous-feed both covered (Angi, 2026)

Garbage Disposal Repair details
This is the appliance service people skip until it becomes a fire risk. The U.S. Fire Administration counts about 2,900 residential dryer fires a year and names failure to clean the vent the leading cause, at 34 percent, peaking in January. NFPA's rule is once a year, or sooner if drying is taking longer than it used to, and to check the outdoor flap isn't buried in snow come winter. A basement laundry often means a long vent run with several elbows; Whirlpool rates every dryer for a maximum length and elbow count.

Price: $75 to $340; a basement or first-floor vent runs $80 to $150 (Angi, 2026)

Dryer Vent Cleaning and Safety details
Whirlpool's own checklist for a window or portable unit that is not cooling starts before any part is broken: is it below 65°F outside (it will not cool under that), are the controls set right, does the filter need cleaning, are the condenser coils dirty, is Power Saver mode left on. A frozen coil usually traces to the same thing, restricted airflow, Carrier says, and running it iced over risks the compressor. Short cycling, turning on and off before finishing a cycle, usually comes down to a dirty filter, a misplaced thermostat or an oversized unit, per Carrier and Trane. Rockford earns its sticky-summer reputation: Illinois State Climatologist data puts the average July high at 84.5°F, with about 13 days a year above 90°F. Refrigerant work needs a technician certified under EPA Section 608, Type I for window and portable units, Type II for central air and mini-splits. HomeGuide's 2026 average is $360, mostly $150 to $650; window units run less, $104 to $354 on Angi.

Price: $150 to $650, averaging $360; window units run $104 to $354 (HomeGuide, 2025; Angi, 2026)

Air Conditioner Repair details
All appliances in one list

Water

Rockford's water is very hard, and your appliances notice

Every public water system here with a state total-hardness result is very hard by the U.S. Geological Survey's scale, which starts "very hard" at 180 mg/L. Illinois EPA's lab measured a median of 377 mg/L (22 grains per gallon) across Rockford's wells from 2022 to 2026, and the Rockford Water Division's own figure is 9 to 21 grains per gallon from its 39 wells.

Hard water leaves scale wherever water is heated or evaporates. GE says that over time hard-water buildup can damage dishwasher components, and that its freestanding ice makers may need cleaning as often as every six months because minerals build up on the freezing plate. Bosch dishwashers even have a code for it, E12, limescale in the heat pump. Angi notes ice maker inlet valves are prone to mineral buildup.

Every town page shows its own system's number, and the hardness table lists them all.

Thick white limescale crusted on a dishwasher door and spray arm
Village of Winnebago269 mg/L (15.7 gpg)
City of Loves Park310 mg/L (18.1 gpg)
Village of Cherry Valley321 mg/L (18.8 gpg)
Village of Rockton324 mg/L (18.9 gpg)
North Park Public Water District362 mg/L (21.2 gpg)
City of Belvidere371 mg/L (21.7 gpg)
City of Rockford377 mg/L (22 gpg)
Aqua Illinois, Candlewick division460 mg/L (26.9 gpg)
Median total hardness in Illinois EPA lab samples, by water system. Ticks mark the USGS band edges at 60, 120 and 180 mg/L (track runs to 500). Bands from the U.S. Geological Survey: 0 to 60 mg/L soft, 61 to 120 moderately hard, 121 to 180 hard, over 180 very hard. One grain per gallon is 17.1 mg/L.

Brands

Error codes and warranties, brand by brand

A code on the display is the fastest clue. The brand pages translate each manufacturer's codes in its own words, explain its warranty and show where the model number is. Independent service: not affiliated with or authorized by any manufacturer.

Local homes

Older Rockford homes, gas lines and propane country

The median home in the City of Rockford was built in 1963, and 46.5% of its homes predate 1960, according to the Census Bureau's 2020 to 2024 American Community Survey. Across Winnebago County the median year is 1972; in Boone County it is 1986. Older houses often put the laundry in the basement, which can mean a long dryer vent run to reach an outside wall.

Gas is the norm: 84% of Winnebago County households and 78% of Boone County households heat with utility gas, which means gas is already piped to most houses for a range or dryer. In the rural townships it is a different picture. heat mostly with tank gas, and gas ranges and dryers there need an LP conversion.

1950s brick ranch house on a tree-lined Rockford street in early autumn

Repair or replace

The honest math on repair versus replace

HomeGuide's rule of thumb: an appliance more than 10 years old, or a repair costing more than half the price of a new one, usually is not worth fixing. But lifespans differ a lot by appliance, so a 12-year-old gas range and a 12-year-old dishwasher are not the same decision.

Check the warranty first. Maytag covers parts for ten years on appliances made after 2017; Samsung and LG cover refrigerator sealed systems for five years; Speed Queen sells washers with five- and seven-year coverage. A repair that looks expensive can be mostly covered parts. The repair or replace guide goes through it.

Expected life, InterNACHI
Gas range
15 to 17 yrs
Electric range
13 to 15 yrs
Range or oven hood
14 yrs
Clothes dryer
13 yrs
Food waste disposal
12 yrs
Freezer
10 to 20 yrs
Refrigerator
9 to 13 yrs
Dishwasher
9 yrs
Microwave oven
9 yrs
Washing machine
5 to 15 yrs

Safety

Gas, refrigerant and dryer vents: where safety rules apply

If you smell gas

Nicor Gas says to leave immediately, avoid switches and phones that could spark, and call 888-642-6748 and 911 from outside. Illinois requires a working carbon monoxide alarm within 15 feet of every bedroom. More

Refrigerant needs a certified tech

EPA Section 608 requires certification for anyone servicing equipment that could release refrigerant; fridges and freezers fall under Type I. Ask to see the card before sealed-system work. More

Dryer vents cause fires

USFA counts about 2,900 residential dryer fires a year, failure to clean the leading cause, peaking in January. NFPA says clean the vent yearly and keep the outside flap clear of snow. More

The old one

Getting rid of an old appliance, town by town

Illinois has banned white goods from landfills since July 1, 1994 unless their mercury switches, refrigerant and PCB components are removed (415 ILCS 5/22.28), so every hauler handles appliances differently. Rockford collects a refrigerator with your bulk items only if a licensed refrigeration technician's refrigerant-free certification is attached. Belvidere and Durand charge $50 per white good through their haulers; Cherry Valley includes one a week; Roscoe's bulk program does not take them at all.

Each town page has its rule and source, and the disposal guide puts them side by side.

How it works

How a repair visit works

  1. 1Tell us what is wrongCall or send the request form: the appliance, brand, model number if you have it, and the symptom or error code.
  2. 2A technician calls backA local technician confirms the visit window and the service call fee before coming out.
  3. 3Diagnosis in your homeThe technician finds the cause and quotes the repair. Nothing is done until you agree to the price.
  4. 4Repair or a straight answerThe repair is done on the spot when the part is on hand, or on a return trip once it arrives. If it is not worth fixing, you hear that too.
The full process

Service area

Every city, village and township in Winnebago and Boone counties

17 town pages, each built from its own data: the hardness of its water, the age and size of its homes, gas or electric, and its rule for old appliances. Each township is covered on the page of the town it surrounds or adjoins.

Winnebago County

Boone County

Common questions

Appliance repair in Rockford: common questions

How much does appliance repair cost in Rockford?

National 2026 cost guides put most refrigerator repairs at $150 to $400, washers at $180 to $250, dryers at $100 to $430, dishwashers at $175 to $325 and ovens at $130 to $310, plus a $70 to $130 service call that usually covers the trip, diagnosis and first hour.

Do you cover Loves Park, Machesney Park, Roscoe and Belvidere?

Yes. The service area is every city, village and township in Winnebago and Boone counties, including Loves Park, Machesney Park, Roscoe, Rockton, South Beloit, Cherry Valley, Belvidere, Poplar Grove and Capron. Each has its own page.

Is Rockford's water hard enough to affect appliances?

Yes. Illinois EPA lab samples of Rockford's wells had a median of 377 mg/L of total hardness, and the city gives 9 to 21 grains per gallon. GE says hard-water buildup can damage dishwasher components over time and that ice makers may need cleaning every six months in hard water.

Which brands do you work on?

All the major brands, including Whirlpool, GE, Samsung, LG, Maytag, Frigidaire, KitchenAid, Bosch, Kenmore, Electrolux, Amana and Speed Queen. This is independent service, not affiliated with or authorized by any manufacturer, so in-warranty repairs should go to the manufacturer first.

Is it worth repairing an appliance over 10 years old?

Often not if the repair is expensive. HomeGuide's guideline is that appliances over 10 years old, or repairs over 50 percent of a replacement, usually aren't worth it. But a gas range lasts 15 to 17 years on InterNACHI's chart, so age alone does not decide it.

Who can repair a refrigerator's refrigerant system?

Only a technician certified under EPA Section 608. Household refrigerators and freezers fall under Type I, small appliances, and venting refrigerant on purpose is prohibited.

How do I get rid of an old refrigerator in Rockford?

Rockford picks it up with your bulk items only if a licensed refrigeration technician's certification is attached stating it is refrigerant-free. Illinois has banned white goods with their refrigerant from landfills since 1994.

Why are appliance repairs so expensive?

HomeGuide lists the biggest factors: labor rates and travel, how bad the damage is, brand and part cost, access (built-in units take longer), part availability, and fuel type, since gas appliances run 10 to 20 percent more than electric to repair.

What is the 50 percent rule for appliance repair?

HomeGuide's rule: if the repair costs more than half of a new appliance and the unit is over 10 years old, replacing it is usually the better math.

Do you tip the appliance repair technician?

It isn't expected. Angi's tipping guide for home service pros calls it optional, with $10 to $20 typical when a customer chooses to for a job well done.

How do I book a repair?

Call (815) 800-0677 or use the service request form with the appliance, brand, model number and symptom. A local technician calls back with a time and a price before any work starts.

About this site

Who runs this site

This site is published by N5 Studio, a Rockford-area web studio, and repair work is performed by a partnered local appliance repair company. Every price, code and rule here links to its source; nothing is invented, and there are no made-up reviews. More about the site.

  • Prices from dated national cost guides
  • Codes in the manufacturers' own words
  • Water and housing data from Illinois EPA and the Census

Appliance down? Get it looked at.

Tell us the appliance, the brand and what it is doing. A local technician calls back with a time and a price before any work starts.