Skip to content

Wall Oven Repair in Rockford, IL

Updated

Short answer

Wall ovens fail the same way range ovens do (bake elements, sensors, igniters, controls, door locks), and Angi puts oven repairs at $130 to $310, averaging $200 (Angi, 2026). The difference is access: a built-in oven sits in cabinetry, so some repairs mean sliding it out. Whirlpool puts wall oven model numbers on the lower left side of the frame with the door open.
Stainless double wall oven built into oak cabinets with the lower door slightly open and lit inside

Model number

Whirlpool: lower left side of the frame, door open (Whirlpool). Frigidaire: along the interior side trim, visible when the door is opened (Frigidaire). GE keeps separate locators for wall ovens on its model finder (GE Appliances).

Codes and faults

The same control codes apply: GE's F2 is an over-temperature, F3 and F4 usually a sensor, F9 the door lock circuit (GE Appliances); Frigidaire's F10 is thermal runaway, which for standard ranges and wall ovens Frigidaire describes as the oven detecting higher-than-normal temperatures, a built-in safety alert (Frigidaire).

Why built-in costs more

HomeGuide lists accessibility as a price factor: labor costs increase for appliances installed in tight spaces and for built-in units (HomeGuide). Angi puts convection and steam oven repairs at $100 to $600 and $200 to $600 respectively (Angi).

Warranty

Bosch lists a one-year parts and labor warranty on built-in wall ovens (Bosch); most brands are similar. Check the purchase date before paying for a repair.

Common questions

Wall Oven Repair: questions

Where is the model number on a wall oven?

Whirlpool puts it on the lower left side of the frame with the door open; Frigidaire along the interior side trim. Both are visible only with the door open.

Do wall ovens cost more to repair?

Often a little. HomeGuide lists built-in units and tight spaces as factors that raise labor cost. Angi's 2026 oven range is $130 to $310.

What does F10 mean on a Frigidaire wall oven?

Frigidaire says F10 means the oven is detecting higher-than-normal temperatures, a built-in safety alert. Turn it off and let it cool; if it persists, contact service.

Wall Oven trouble?

Tell us the appliance, the brand, the model number if you have it, and what it is doing. A local technician calls back with a time and a price before any work starts.